The Foiling Press – January 2026 – We’re kicking off 2026 with serious momentum. Multiple builds are in final rigging, new hulls are coming out of the mold, and the team is busy hosting private demos while gearing up for a packed show schedule. It’s shaping up to be a fast and exciting start to the year—here’s the latest from the shop, and if you happen to be heading to Miami this week, don’t forget to book your private sea trial!!
Hull #25 – Final Rigging Underway
Hull 25 is officially in final rigging, with a major milestone checked off last week—the cap and liner have been installed. From here, it’s all about dialing in systems, finishing details, and bringing everything together. This build is rapidly approaching the finish line.
We can’t wait to watch our buddy Robert Arrington get back behind the helm of an Insetta, and we’re sure she’s going to create some amazing memories that everyone can tune into on his YouTube channel, DeerMeatForDinner.
Hull #26 – Headed to Miami for Private Demos!
Hull 26 was down to the wire; she’s 99% complete and passed her water tests with flying colors. She’s heading down to Miami this afternoon and is available for private demos, giving select guests the opportunity to experience one of the most heavily outfitted 35IFCs we’ve ever built! There are still a few loose ends to tie up with audio and lighting, but she is ready to rock this week!
We have a private venue just north of the Miami Boat Show that will allow us to facilitate sea trials for interested buyers. Unfortunately, the show would not let us run sea trials, which is why we’ve opted for our own private waterfront location. There are limited time slots remaining, but if you want to come check this boat out, please reach out to us at 912-227-0446 and we will try to accomodate you to the best of our abilities.
📍 Miami Sea Trials – February 12–14, 2026
Hull #27 – Fresh Out of the Mold
Hull 27 made huge strides this past week:
The hull was pulled from the mold
The liner has been infused, with compartments installed
The cap has also been infused
The majority of medium and small parts are complete
With nearly all components built, this project is moving quickly and is now ready to transition into full assembly.
the next major phase of production.
Hull #28: Production Moving Fast!
Another build is already well underway. On Hull 28:
The console, leaning post, and hardtop have been infused and released from their molds
All small parts are currently in infusion
The hull mold is being prepped for infusion this week
Early progress has been strong, and this hull is tracking right on schedule.
NEW ARRIVAL - 2023 Insetta 35IFC – Twin 300 HP Mercury V8 300's & 1512 hours – Simrad Electronics
The owner of this beautiful 35IFC has decided he’s ready to upgrade to a new 35IFC, so this rig is officially FOR SALE! Freshly detailed and ready to fish, this boat has been putting a hurt on the fish out of St Simon’s Island over the past few years and has been well cared for and nicely maintained. Priced at $465K OBO, details and photos below:
Standard Equipment
Deck
Standard “whisper gray” gelcoat
Molded-in diamond non-skid
Tackle storage (starboard + port)
19-gallon freshwater washdown/shower
5x in-deck storage hatches
2x in-deck macerated fish boxes
Large anchor locker
625-qt insulated coffin box (split boxes)
Walk-through transom access (door optional)
(2) 40-gallon integrated transom livewells
Fresh + raw water washdown
32 Gemlux rod holders (gunnels + coffin box)
7 stainless pull-up cleats
LED navigation lights
Front/rear spreader lights + deck lights
Dive ladder
Powder-coated recessed stainless bow rail
Helm / Console
Hardtop with powder-coated aluminum supports
Tempered safety glass enclosure for console
6 integral rod holders built into rear support
Molded fiberglass leaning post with rear-face seating + cooler (165-qt under rear-facing seat)
(3) wide helm seats with shock-absorbing brackets
(6) stainless cup holders
Storage box + rigging tray on rear-facing seat
Storage drawers under helm seats
165-qt leaning post ice box under rear-face seats
Upholstery
Base upholstery (Upgraded to Two Tone)
Equipment & Electronics
3-part internal foil system
3-pump capacity sea chest (dual livewell pumps + raw water feed)
(4) 2000 GPH bilge pumps (2 in each sponson)
Standard Capacities
490-gallon fuel capacity
625-qt insulated coffin box with divider
165-qt leaning post cooler
Dual 40-gallon livewells
19-gallon freshwater
In-deck macerated fish boxes
Options (Schedule B)
Upholstery & Decking Options
Premium 2-tone upholstery
Triple helm chairs on shocks (Gioia)
Forward sun shade
Electronics
SIMRAD NSO EVO3S MPU with dual 19″ multi-touch monitors bundle:
OP50 controller
MI10 card reader
Simrad HALO 24″ radar
XSONIC SS175M-W/20 stainless steel 20° transducer
Simrad RS40 VHF w/ DSC + AIS receive
WM-4 Sirius sat weather & radio module
N2K-T-RD Micro-C T-connector (additional network device)
Installed / System Upgrades
Battery charger (installed)
Windlass (installed)
Roswell audio package
Transducer swap: SS175M → SS175L and SS175H
Radar swap: 24″ dome → pedestal + 4′ array
Additional Options
3″ step at helm
Recessed wireless phone charger (pair)
Seadeck upgrade — diamond pattern
Acrylic “Glass Cockpit” flush-mount dash with cover (STD)
Six (6) additional rod holders
Pair (2) additional swivel-base rodholders
Pair electric reel outlets
In-console electric flush head with 19-gallon tank
Pair of in-deck fish boxes — macerated
Forward (2) + rear (2) spreader/flood lights (Lumitec)
Side (2) spreader/flood lights (Lumitec)
Under-gunnel LED lights
Underwater lights
Light bar — Lumitec spotlight on T-top
Hardtop rocket launcher — foil shape
Acrylic slide-in door for transom
Pair Gemlux outrigger bases with backing plates
Pair Gemlux outrigger poles with shade connections
Bottom-painted
Upcoming Events
February 11th-15th
Miami International Boat Show – Miami, FL (NOW BOOKING)
March 20th-22nd
The Wharf Boat Show – Orange Beach, Alabama
March 28th-29th
The Florida Saltwater Fishing Expo – Daytona Beach, FL
May (Dates TBD)
South Carolina
July (Dates TBD)
Stuart, FL
September (Dates TBD)
Louisiana
October 28th – November 1st
Fort Lauderdale International Boat Show – Ft. Lauderdale, FL
